Delete autobrightness.sh

autobrightness.sh

@@ -1,169 +0,0 @@
-#!/bin/bash
-# Slight Alteration of AutomaticBrighness.sh (could be a dell specific fork)
-
-#variables to run
-
-#decrease cpu usage
-Priority=19 # CPU limit, adjust as needed
-
-# How much light change must be seen by the sensor before it will act
-LightChange=10
-
-# How often it checks the sensor
-SensorDelay=1
-
-# Scale sensor to display brightness range
-SensorToDisplayScale=20
-
-# This should match your refresh rate otherwise it will either change the backlight more times than needed or too few for a smooth animation
-LevelSteps=60
-
-# The is should match the LevelSteps but in the actual time each event should take to see
-AnimationDelay=0.016
-
-# Read the variable names
-MaxScreenBrightness=937
-MinimumBrightness=1
-
-#minimum illuminance to get minimum brightness
-
-MinimimumIlluminance=0
-
-# 2 : Default | 1 : Add Offset | 0 : Subtract Offset, Recommended not to change
-op=2
-
-#place where you get the brightness of the monitor being controled and the sensor of brightness
-MonitorBrightness=/sys/class/backlight/intel_backlight/brightness
-
-#my sensor keep changing places, this way it will always be found with * if you have lots of sensors
-
-AnbientSensorIlluminance=`echo "$(set -- $(realpath /sys/bus/iio/devices/iio:*/in_illuminance_raw); echo "$1")"`
-
-
-while getopts i:d: flag; do
-  case "${flag}" in
-    i) op=1
-       num=${OPTARG};;
-    d) op=0 
-       num=${OPTARG};;
-  esac
-done
-
-if [[ -f /tmp/AB.offset ]]; then
-  OffSet=$(cat /tmp/AB.offset)
-else
-  OffSet=0
-  echo $OffSet > /tmp/AB.offset
-  chmod 666 /tmp/AB.offset
-fi
-
-OffSet=$((OffSet < 0 ? 0 : OffSet))
-
-if [[ $op -lt 2 ]]; then
-  if [[ $op -eq 1 ]]; then
-    OffSet=$((OffSet + num))
-  else 
-    OffSet=$((OffSet - num))
-  fi
-
-  OffSet=$((OffSet < 0 ? 0 : OffSet))
-  echo $OffSet > /tmp/AB.offset
-  chmod 666 /tmp/AB.offset
-  exit
-fi
-
-
-# Set the priority of the current script and says it is running
-renice "$Priority" "$$"
-touch '/tmp/AB.running'
-
-
-OldLight=$(cat $AnbientSensorIlluminance)
-
-until [ -f /tmp/AB.kill ]; do
-  if [[ -f /tmp/AB.stop ]]; then
-    rm '/tmp/AB.stop'
-    rm '/tmp/AB.running'
-
-    until [[ -f /tmp/AB.start ]]; do
-      sleep 10
-    done
-
-    rm '/tmp/AB.start'
-    touch '/tmp/AB.running'
-  else
-    if [[ -f /tmp/AB.offset ]]; then
-      OffSet=$(cat /tmp/AB.offset)
-    else
-      OffSet=0
-      echo $OffSet > /tmp/AB.offset
-      chmod 666 /tmp/AB.offset
-    fi
-
-    Light=$(cat $AnbientSensorIlluminance)
-    RealLight=$(cat $AnbientSensorIlluminance)
-    Light=$((Light + OffSet))
-    RealLight=$((RealLight + OffSet))
-
-    if [[ $Light -lt $LightChange ]]; then
-      MaxOld=$((OldLight + LightChange))
-      MinOld=$((OldLight - LightChange))
-    else
-      MaxOld=$((OldLight + OldLight/LightChange))
-      MinOld=$((OldLight - OldLight/LightChange))
-    fi
-
-    if [[ $Light -gt $MaxOld ]] || [[ $Light -lt $MinOld ]]; then
-      CurrentBrightness=$(cat $MonitorBrightness)
-      Light=$(( $Light + $MinimumBrightness ))
-      TempLight=$(($Light * $SensorToDisplayScale))
-
-      if [[ $TempLight -gt $MaxScreenBrightness ]]; then
-        NewLight=$MaxScreenBrightness
-        LimitMaxIlluminanceReached=1
-      elif [[ $RealLight -le $MinimimumIlluminance ]]; then
-        NewLight=$MinimumBrightness
-        LimitMinIlluminanceReached=1
-      else
-        NewLight=$TempLight
-      fi
-
-      DiffCount=$(( ($NewLight - $CurrentBrightness)/$LevelSteps ))
-      
-      for i in $(eval echo {1..$LevelSteps}); do
-        NewLight=$(( $DiffCount ))
-
-        if [[ $NewLight -lt 0 ]]; then
-          NewLight=$( echo "$NewLight" | awk -F "-" {'print$2'})
-          NewLight=$(echo $NewLight-)
-        else
-          NewLight=$(echo +$NewLight)
-        fi
-        
-        if [[ $i -eq $LevelSteps ]]; then
-          brightnessctl -q s $NewLight
-          
-          if [[ $LimitMaxIlluminanceReached -eq 1 ]]; then
-            NewLight=$MaxScreenBrightness
-            LimitMaxIlluminanceReached=0
-          fi
-          
-          if [[ $LimitMinIlluminanceReached -eq 1 ]]; then
-            NewLight=$MinimumBrightness
-            LimitMinIlluminanceReached=0
-          fi
-        fi
-          
-        brightnessctl -q s $NewLight
-        sleep $AnimationDelay
-      done
-
-      OldLight=$Light
-    fi
-
-    sleep $SensorDelay
-  fi
-done
-
-rm '/tmp/AB.running'
-rm '/tmp/AB.kill'