69 lines
3 KiB
Markdown
69 lines
3 KiB
Markdown
# This fork has this changes:
|
|
The darker mode, when the illuminance is less than 1 i.e. 0, it will go to the target brightness that is 1. Can be easily changed.
|
|
|
|
If the file AB.offset have 0 as value. Darker mode is activated and setting brightness will reset to target value 1 when illuminance is less than 1.
|
|
if the file has value of 1, it will be the normal mode and the screen brightness can be adjusted until the illuminance sensor changes.
|
|
|
|
easier to change variables and places and chmod 666 /tmp/AB.offset for the user to change modes when script is running as root (systemd service)
|
|
darker mode as default with normal mode done by typing "echo 1 > /tmp/AB.offset"
|
|
|
|
they are in autobrightness.sh
|
|
|
|
# Mac-like-automatic-brightness
|
|
A simple script to provide a "Mac" like automatic brightness adjustemnt/ animation
|
|
|
|
made for the FrameWork laptop
|
|
|
|
based on 2017 MacBook Pro
|
|
|
|
read ```Configuration``` for detailed informatoion about what options you have to easily customize/ adjust the bightness or animation speed
|
|
|
|
## Requires
|
|
brightnessctl
|
|
|
|
## Non 12th Gen Intel Framework Owners
|
|
Your sensor has a diffrent range thant the 12th Gen Intel Framework laptop sensors, please see chart bellow
|
|
|
|
|
|
Type | Sensor Rnge | STDScale
|
|
11th Gen Intel | 0 - 3207633 | 1
|
|
12th Gen Intel | 0 - 3984 | 24
|
|
|
|
## Controls
|
|
```./AutomaticBrightness.sh | Defualt running mode of script```
|
|
|
|
```./AutomaticBrightness.sh -i [NUMBER] | Increase the offset your brightness sensors raw reading ```
|
|
|
|
```./AutomaticBrightness.sh -d [NUMBER] | Decrease the offset your brightness sensors raw reading ```
|
|
|
|
```/tmp/AB.offset | Stores current offset for the sensor```
|
|
|
|
```/tmp/AB.stop | Stops AutomaticBrightness.sh```
|
|
|
|
```/tmp/AB.start | Starts stopped AutomaticBrightness.sh```
|
|
|
|
```/tmp/AB.kill | Kills AutomaticBrightness.sh```
|
|
|
|
when running you will see a ```AB.running``` file and ```AB.offset``` in ```/tmp```
|
|
|
|
|
|
## Configuring
|
|
```Light Change``` The percent of light change needed to be seen by the sensor for it to change the screen brightness
|
|
|
|
```SensorDelay``` Time in seconds the script will wait to check the sensor for a luminess change after the animation (LevelSteps * AnimationDelay)
|
|
|
|
```SensorToDisplayScale``` The ratio from sensor to screen brighness, recommended minimum 24 for 12th gen framework laptops. Increasing the value will give a brighter screen for the amount of light in the room/ enviroment
|
|
|
|
```LevelSteps``` Sets amount of brightness steps, recomended to match refeshrate
|
|
|
|
```AnimationDelay``` Speed of the brightness animation(delay between each step), recomended screen refreshrate in seconds
|
|
|
|
```MaxScreenBrightness``` The highest value your screen supports, check ```/sys/class/backlight/intel_backlight/max_brightness``` on framework laptops
|
|
|
|
```MinimunBrightness``` The minimum screen brightness, recomended minumim 001 so the backlight dosn't turn off
|
|
|
|
~~ Other things to note
|
|
|
|
```Light``` The file where your lightsensor has its current value
|
|
|
|
```CurrentBirghtness``` The file where your screen stores its current brightness
|